Steps To Installing Lawn Sprinklers in Grand Rapids

by | May 9, 2013 | Construction and Maintenance

Although the manufacturers of Lawn Sprinklers in Grand Rapids offer help in supplying instructions as well as shopping lists that you will need in installing your sprinklers, it is still no easy task. On a level of easy to hard, the installing of a 1 or 2 zone system in your yard runs on the moderate to hard side and figures out to be between $1,000 to $1,500. The typical job however, can be done in a weekend or at least 15 to 20 hours of dedicated work time.

Before you begin a project such as an in-ground sprinkler system, you need to check for pounds per square inch and gallons per minute, or pps and gpm respectively, that you get from your water source. You need at least 30 to 35 pps and 10 to 13 gpm to adequately water your lawn. The manufacturer you choose to buy your system parts from will help supply a schematic for your pressure once it is determined.

Determining the water pressure may have been the easiest part of the job. After that you have to dig trenches, make a water connection, install zone valves, place the pipes in the trenches, connect the pipe at the valve box, install the pop-up sprinklers, roll out the irrigation, install the ground stakes, and finally connect the wires. One word about the pop-up sprinklers if you were considering using stationary ones is that the pop-up sprinklers are more precise in their output of water not to mention dropping out of sight when not in use.

Putting in the Lawn Sprinklers in Grand Rapids is a sure way to get to know the system first hand. Inevitably, every season there will be some sort of repair work or adjustment that needs to be made to make sure the system is working efficiently. Knowing the system and where the valves are will make this considerably easy to work on. It is also important so that if you want to add things like Landscape lighting you can install it without hinting any of the underground piping for the water system.

Recent Articles



Similar Posts