Preparing for Retractable Awning Installation in Tempe

by | Feb 6, 2015 | Windows And Doors

An awning is an exterior covering attached to the wall, usually above a door or window. This overhang provides shading. It also helps provide indirect contact with rain and sunlight. A person can leave a window or door open during rain without the rain entering the home. Awnings also offer a way to enhance the exterior appearance of a home. If you want to install them onto your home, it’s advisable to prepare for retractable Awning Installation in Tempe. Use the following suggestions for this task.

Before you install your awnings, ensure that you are safely prepared. If you will be using a ladder, don’t exceed the weight limit. The extension-ladder rung locks should be secured. Place the ladder on steady ground. It’s ill-advised to work when it’s dark or during bad weather. For higher placement of awnings, use fall-protective equipment such as a harness and elongation rope.

When you remove an awning from its package, do so carefully. Be cautious when removing the plastic covering an awning might be shipped in. Don’t use a knife or box cutter to remove this covering. You could accidentally damage the material used to make the awning. Most awnings are shipped fully assembled. However, it’s important to fully read all directions. Familiarize yourself with the parts of your awning. A retractable awning may have a motorized component. This element of the awning should be handled with extra caution to prevent damaging it.

Before Awning Installation in Tempe, look at the areas where you will mount your awnings. They should be free of obstructions such as lights, gutters, or wiring. Walls should not have bows or sweeps. If a wall have any projections or curves, it can cause an awning to have faulty placement. An average awning weighs about 7 to 12 pounds. This significant weight warrants the need to securely fasten mounting brackets for proper support. Ensure that you know where the studs and header boards are located. The mounting lag bolts will need to be fastened to these construction elements for proper support.

Installing an awning can be a fun experience. When you take the time to read the instructions and follow practical preparation guidelines, you can successfully attach an overhang that will provide enhanced appeal and convenience. For more information on awnings, please Visit

Recent Articles



Similar Posts